Tips For Troubleshooting Your Home Alarm System In Muncie
False alarms and system glitches can be frustrating, and even worse, may prevent your security system from working the way it should. Fortunately, most issues, from dead batteries to false alarms, are easy to remedy. Take a look at our tips for troubleshooting your home alarm system in Muncie. We’ll help keep your family shielded and your system operating the way it should.
Test Your Home Security System In Muncie
One great way to troubleshoot your property’s defense is to test it! Newer systems have a test mode so you don’t mistakenly prompt an emergency call. After moving to test mode, follow these steps:
- Activate your system as you normally would when leaving.
- Open a door or window that has a contact sensor, or test other equipment. Close the door or window so it doesn’t trip the alarm as you switch out of test mode.
- Let the alarm go off for 60 seconds to ensure communications with the security provider and to create an entry in the alarm activity log.
- Proceed to test devices as you wish
- Check the systems’s activity log to confirm that everything’s working.
No need to worry, monitoring agents can tell that your alarm system is being tested. Just make sure to switch out of test mode when complete. It’s smart to test once a month or anytime you change your home’s internet or phone connectivity.
Evaluate The Positioning And Condition Of Motion Sensors
Although an integral part of your alarm system, motion detectors are well known for false alarms. Do your part to prevent them with some easy troubleshooting.
- Conduct a visual inspection. Are there objects that could shift within the sensor’s detection range, like a curtain taken by a breeze?
- Is the sensor covered in dust? Cobwebs, dirt, and grime can lead to malfunctions. Ensure the face is clean.
- Does the motion detector offer pet immunity you can turn on? Some models can be programmed to ignore pets weighing as much as 100 pounds.
- When was the battery changed? Low batteries may impact performance or cause false alarms.
- Is a heat source affecting the sensor? Excessive heat from a fireplace, direct sun, or something else can cause an alarm.
Keep Batteries Ready And Look Out For Low Battery Signals
One of the great aspects of modern home security systems is that they’ll alert you when batteries are running low. If your system has a app or control panel, you’ll typically find notifications there. Depending on your system, you may notice an occasional beep when batteries are getting low.
Contact sensors, smoke detectors, motion sensors, and other wireless tools have batteries that need to be replaced every 1 to 2 years. It’s wise to keep batteries around and establish a replacement schedule. Top systems also include a backup battery for the central control panel. This backup helps keep your system running if your power goes out and should recharge itself once the electricity is working again. If it fails to recharge, you should replace it.
Troubleshooting Is Simple With ADT Home Security In Muncie
As the leading name in home security, ADT builds systems that provide superior protection and functionality. Getting into test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always be sent alerts when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfectly suited to your Muncie home. Place a call to (765) 221-8081 or submit our form today!